This power unit functions a long term magnet motor by using a power up gravity down circuit. Activate the start out solenoid to begin the motor to lift the machine. The lowing motion is activated through the solenoid valve with all the decreasing speed controlled from the strain compensated movement manage valve. Goods of this series is often broadly used in the sector of logistic products such as fork lift, mini lift table, and so forth.
1. This energy unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all the hydraulic components concerned just before set up of the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which must also be clean and free of charge of impurities. N46 hydraulic oil is suggested.
four. This power unit is built to be mounted vertically.
five. Check the oil degree within the tank immediately after the initial star in the energy unit.
six. Oil modifying is required following the initial a hundred operation hrs,afterwards once every single 3000 hours.
seven. More pump sizes and tank sizes are avaiable upon request.