DUMP TRAILER Energy UNIT- SINGLE ACTING
This energy unit includes a power up gravity down circuit. Get started the motor to extend the cylinder and activate the solenoid valve to retract the circuit. Manual override to solenoid valve might be presented if demanded. Also a pressure compen sated flow control is often added for the circuit to manage the descent speed of the cylinder.
Remark: Please talk to our product sales engineer to the unique pump displacement, motor electrical power or tank capability.
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned ahead of set up of the energy unit.
3. Viscosity in the hydraulic oil shoud be 15~46 cst,which ought to also be clean and no cost of impurities.N46 hydraulic oil is advisable.
four. The electrical power unit must be mounted horizontally.
five. Check the oil degree in the tank soon after the original operating from the electrical power unit.
6. Oil changing is needed right after the first one hundred operation hrs, afterwards once each and every 3000 hrs.
DUMP TRAILER Power UNIT-DOUBLE ACTING
This electrical power unit includes a energy up energy down circuit with load holding on the two A & B ports. A stress compensatred movement manage is often added to circuit to regulate the decent speed of the cylinder.
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean every one of the hydraulic parts concerned ahead of set up of the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which need to also be clean and no cost of impurities. N46 hydraulic oil is suggested.
four. The energy unit really should be mounted horizontally.
5. Check the oil degree during the tank after the original operating in the energy unit.
6. Oil modifying is required after the initial a hundred operation hours, afterwards the moment each 3000 hours.