Basic Description
Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is intended to operate material dealing with equipment. The decreasing movement is achived through the solenoid valve with the lowering velocity controlled by an adjustable needle valve. The left and right functions are equipped by using a dual pilot operated verify valve and cross-over relief valves.
Remark: Please seek the advice of our sales engineer to the distinct pump displacement, motor electrical power or tank capacity.
Exclusive Notes
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
2. Clean each of the hydraulic parts concerned in advance of installation of the power unit.
3. Viscosity with the hydraulic oil shoud be 15~46 cst, which should also be clean and free of charge of impurities.N46 hydraulic oil is encouraged.
4. This power unit really should be mounted horizontal.
5. 
Check the oil degree while in the tank soon after the primary commence from the energy unit.
six. Oil altering is required soon after the first one hundred operation hours, afterwards the moment each 3000 hours.
