FSPCR Form Spacer Couplings
The FSPCR Variety coupling consists of two flex 
hubs, two sleeves, one spacer and two accessory kits. This coupling is supplied with exposed bolts as standard. Shrouded bolts are available on request by dimension 5.five.
Characteristics
For prolonged life
Standard 20° strain angle
Heat handled bolts for better power
Corrosion resistant bolts and nuts for ease of maintenance
Provides parallel, angular misalignment and finish float
Removal of spacer provides ample space for your removal of either coupling half without the need of moving the driver or driven units
Ordering Data
Application: Driver and Driven.
Type and dimension of coupling, horizontal, vertical and so forth.
Power: Motor horspower or torque necessity.
Speed: Motor RPM or Driven RPM.
Distance involving shaft ends (BSE).
Shaft sizes.
FSLX Style Lengthy Slide Couplings
The FSLX Type basic coupling includes a regular flex half along with a customized designed extended slide half. The typical flex half might be replaced by a reversed and modified hub for supplemental slide necessity. These couplings are also provided by using a plate with lube holes. The coupling is provided with exposed bolts as conventional. Shrouded bolts out there upon request by size five.five.
Capabilities
For extended life
Normal 20° stress angle
Heat treated bolts for higher strength
Corrosion resistant bolts and nuts for ease of servicing
Assembled to suit a wide variety of axial motion
Plates with lube holes so the two halves from the coupling will likely be adequately lubricated
Ordering Details
Application: Driver and Driven.
Kind and dimension of coupling, horizontal, vertical etc.
Electrical power: Motor horspower or torque necessity.
Speed: Motor RPM or Driven RPM.
Distance in between shaft ends (maximum-minimum shaft separation).
Shaft sizes.
Level of slide needed.
HL Dimension.
LTB2 Dimension.